Wheel:
26″/27,5″
Stroke:
203 mm
Stanchions:
40 mm/ alloy 7075-T6/ hard anodizing + PTFE
Spring:
open air cartridge / positive and negative chambers with relief valve.
Damper:
closed cartridge RC / rebound and low speed compression adjustment
Axle:
20 mm/ “cone-cone” clamping system + radial fixation
Steerer tube:
1-1/8” / Alloy 7075-Т6
Weight:
from 2.900 gr
A NUMBER OF ADVANCED SOLUTIONS ARE IMPLEMENTED IN THE GARK FORK:
The fork has great rigidity. In order to increase the rigidity of the fork it is made of high-strength alloy 7075-Т6. All parts have undergone CNC processing. The idea to perform the lower part of the 7075-T6 alloy have excluded the possibility to make of casting. This idea led to a folding design.
Milled dropouts and the arch. Arch has a very rigid polygonal construction. But in spite of the rigidity these parts are most loaded, and in our case they are removable, which creates the maintainable design. You will be able to replace the arch on your own, dropouts have to be replaced in the nearest service center.
The new axis clamping system, allows to use a continuous dropouts enhancing its construction. The axis has a radial fixation with a special design and “cone-cone” clamp, which eliminates self loosening.
Postmount 203 mm brake fixing. It is possible to install a rotor with 220 mm in diameter by means of an adapter.
Open type air cartridge has an excellent progressiveness and allows fine-tune of the air spring for any user. The piston has a relief valve that allows to renew pressure in a negative chamber by means of positive.
MAIN CHARACTERISTICS
GARK
Wheel: 26"/27,5"
STROKE: 203 mm
STANCHIONS: 40 mm/ alloy 7075-T6/ hard anodizing + PTFE
Spring: open air cartridge / positive and negative chambers with relief valve.
DAMPER: closed cartridge RC / rebound and low speed compression adjustment
Crowns: milled / Alloy 7075-Т6
LOWERS: Alloy 7075-Т6/ removable milled arch and screwed-in dropouts
STANCHIONS STEP: 150 mm
Brake: Postmount 203 mm
Rotors’ max. size: 220 mm
AXLE: 20 mm/ “cone-cone” clamping system + radial fixation
STEERER TUBE: 1-1/8” / Alloy 7075-Т6
Crowns’ and arch clamping bolts: М6/ titanium alloy
Application: DOWNHILL
Weight: from 2.900 gr